The only thing that is necessary to adapt to any printer is to make some mounts for the PTFE (for the extruder) and the switch mount. However, we have several designs that will work already. In the case of the Artillery Genius Pro, the PTFE for the extruder should just mount to the top of your extruder, and the switch can mount to the 8020 aluminum using a T-Nut that is provided. On that printer, it'll be mounted on the right side of the X axis. The electronics can mount to the 8020 on the side and the unit itself can mount to the top.
The only thing that is necessary to adapt to any printer is to make some mounts for the PTFE (for the extruder) and the switch mount. However, we have several designs that will work already. In the case of the Artillery Genius Pro, the PTFE for the extruder should just mount to the top of your extruder, and the switch can mount to the 8020 aluminum using a T-Nut that is provided. On that printer, it'll be mounted on the right side of the X axis. The electronics can mount to the 8020 on the side and the unit itself can mount to the top.