Hey everyone, I don't know what I'm doing wrong but I cannot, for the life of me, get my filament loaded. Can someone explain to me how to get the filament loaded?
Everytime I've been trying something happens completely different then I expect to. Sometimes a random filament loads then unloads, and sometimes a random one unloads then loads. Any help is greatly appreciated 🙂
Ok... here are the step by steps to load it, and optionally test it all. Can you tell me which step it is having issues with?
Loading and validation checkout
--------------
1) Switch to Mode 3 - press the switch for 10 pulses
until the unit responds with 3 short pulses.
2) Press switch and let go after 7 vibrations. The 3DChameleon will home the selector (and make a small grinding noise)
3) Insert filaments into slots T1, T2 and T3 until it reaches 1" before the Y adapter.
4) Press switch and let go after 1 vibration.Â
5) Insert filament into slot T0 and press the button.
6) The 3DChameleon will start driving filament T0, hold the button until it reaches 1" before the Y adapter.
To test it,
7) Cycle through 1, 2, 3 and 4 pulse count switch press tounload and load the various filaments... for each filament press the button a second time to unload the previous filament and a third time to load the new filament.
Bill