Hello, I have two printers available to install the 3D chameleon. I have a stock Ender 3 V2 and an Ender 3 with sprite extruder pro. Both using Klipper. Which one would be better printer installed the 3Dchameleon.
Since both of your printers run Klipper, you might want to look at the 3MS instead. It's a modular multimaterial system designed for Klipper 3D printers. A 4 color system would cost around $110 in parts. If you want, you can have anywhere from 2-4 filaments (more if you use multiple controllers). It's fully open source and has complete documentation. Also, I don't make any money if you build one.
Since both of your printers run Klipper, you might want to look at the 3MS instead. It's a modular multimaterial system designed for Klipper 3D printers. A 4 color system would cost around $110 in parts. If you want, you can have anywhere from 2-4 filaments (more if you use multiple controllers). It's fully open source and has complete documentation. Also, I don't make any money if you build one.
The V2 is easier, but the Sprite extruder will be more reliable in the long run.
Bill