SELLING - MK4 Mainboard

Hi All.

tldr: I am producing my own mainboards from the open source materials provided by Bill, and am looking to sell excess boards... $35USD Per Board. They will come programmed with the latest software. Please register interest here so i know if i need more.

The long story:

I was previously unable to purchase this product due to being outside the USA. Since this has now been open sourced i am in a position to make my own 3d Chameleon. Part of the process here is to have the mainboards manufactured for the Chameleon. The manufacturer has a minimum order of 5 boards. Therefore i will have 4 mainboards i am not in need of.

The boards are basically exactly what was sold in the kits previously, with a few altered components due to availability at the manufacturer. (over time older components become unavailable and obsoleted)

I am looking at pricing these mainboards at around $35USD at this point in time. The boards will come programmed with the latest software, I will also be happy to include some hard to get items imported from the US such as the Springs for the switching Mechanism.

Please note i have been given permission from Bill himself to reproduce these boards. so please let me know if you are interested!

Price may fluctuate depending on parts cost and availability however it will not be by much. I will have an eBay listing for this once i have the boards ready and tested.

Thanks!

------------------------------------------

UPDATE - 12/01/2025:

I have ordered a small batch of boards! These should be in my hands at the end of the month.

Once i receive them i will program and test them. I am looking to have these boards ready to ship mid February at this point. Unless they are somehow delayed. Please check back here for updates!\

UPDATE 2 - 23/01/2025

Hi all, I wanted to update you with progress so far. I have received confirmation from the PCB manufacturer that the boards have been cut and assembled and have been shipped to me. While i wait for the boards to arrive for programming and testing, i have been printing and building my own 3d chameleon and it is coming along well. I just need to sort the PTFE tubes out and i should be ready for the mainboard. Keep an eye on this space!

Pic for reference.