Should both be fine, but you can see some good info on the pololu site (e.g. the application note on wiring steppers)
This is the comparison on 16pin motor carrier boards (bottom of table shows the two you want), which offers the slightly higher current and voltage info for the DRV8825:
Should both be fine, but you can see some good info on the pololu site (e.g. the application note on wiring steppers)
This is the comparison on 16pin motor carrier boards (bottom of table shows the two you want), which offers the slightly higher current and voltage info for the DRV8825:
https://www.pololu.com/search/compare/269