I 3d printed the stl for the 4-1 adapter, but the filament tends to get caught. I am planning on using this: https://www.aliexpress.us/item/3256807796672472.html?spm=a2g0o.productlist.main.17.3461748bsTSuRk&algo_pvid=7661bfd5-65f9-41af-a8c4-fc24a40a3c87&algo_exp_id=7661bfd5-65f9-41af-a8c4-fc24a40a3c87-8&pdp_npi=4%40dis%21USD%213.89%213.89%21%21%213.89%213.89%21%402101ec1a17356138900347412e55ab%2112000043147194279%21sea%21US%216242698492%21X&curPageLogUid=RElcmdHqFC4u&utparam-url=scene%3Asearch%7Cquery_from%3A
The only problem is that this makes every PTFE tube at the same height, instead of 2 being higher than the rest. How would I modify the code to fix this?
I bought 2 of these.
One had one hole cloged during printing, they are printed.
Second had 2 holes very tight and filament hard to pass through.
I read also that the ones for Bambu printers are very good.