To test this feature, visit your live site.

I NEED SOMEONE'S HELP.

1) Can someone create an Anycubic Kobra Max printer profile on Prusaslicer with this mk3 gcode (below)

2) Export a gcode with 6 layers and using random extruder colors for each one? My printer will not print 100% multicolor prints, but it will print 1 solid print 100%. I just want to make sure that's not my prusaslicer setup or gcode. setup the prusaslicer like you would for your printer and don't worry about mine because I will be running your gcode with no filament, so I'm not worried about it.

5 comments

5 Comments

Bill

Mar 17, 2023

Can you send me your Prusa Profile? Is this related to the previous one? I can look it over and see if I see anything incorrect. (The 3MF that you're printing should have everything I need in it.)

Bill

Christopher Thornton

Mar 18, 2023

Replying to

Hey, Bill. I started from scratch again with Prusa slicer. I found out that printing with only 4 colors works, but anything over that number doesn't finish and stops the print.

https://drive.google.com/file/d/1Pzboczwm4uboXuvrbWyDWxnAniANxt21/view?usp=share_link (4 color options) https://drive.google.com/file/d/1h3IhmlidJYRrEaitpEbApniX-6xYrPjG/view?usp=share_link (5 color options)

Christopher Thornton

Mar 18, 2023

Replying to

I had success with getting this to print: https://drive.google.com/file/d/1Pzboczwm4uboXuvrbWyDWxnAniANxt21/view?usp=share_link

Christopher Thornton

Mar 18, 2023

Replying to

When I change it to blue, black, yellow, gray, blue it doesn't work: https://drive.google.com/file/d/1Pzboczwm4uboXuvrbWyDWxnAniANxt21/view?usp=share_link