I found the switch wire harness was unplugged when I opened my box. There are 3 wires in the bundle and I don't see anything to indicate a polarity. The plug fits the pins both ways. Which orientation is correct?
The green wire goes towards the outside and the red goes towards the inside. The red should match the orientation of the stepper motor connectors as well.
what do i do to fix this dont have the tools to swap them now i know why i cant get this to work
if thats the case mine is backwards for both extruder and selector
Thank you
The green wire goes towards the outside and the red goes towards the inside. The red should match the orientation of the stepper motor connectors as well.
Bill